Support Support Downloads Knowledge Base Service Request Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] Accessing the Command Line Interface Using Telnet

0

0

Article ID: KB4082 KB Last Updated: 11 Nov 2019Version: 8.0
Summary:

This article explains how to access the Command Line Interface by using Telnet.

Solution:

To access the command line interface using telnet, perform the following steps:

  1. Access a command prompt. To access the command prompt on a Windows platform, go to the Start menu (  ), select Run, and then in the text box enter CMD.

  2. From the prompt, enter telnet and your trust interface IP address. Press ENTER.

    Note: The default IP address for the Trust interface of your Juniper firewall device is 192.168.1.1.

    Image of step two

  3. From the Remote Management Console screen, enter your login. Press ENTER.

    Note: The default login and password is netscreen. Both the login and password are case-sensitive.

    Image of step three

  4. From the password prompt, enter your password, and then press ENTER.

    Note: The password is based on keystrokes. For security purposes, the password is not displayed as it is entered.

    Image of step four


 
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Security Alerts and Vulnerabilities

Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search