Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[Archive] Configuring an L2TP VPN Policy on the Juniper Firewall

0

0

Article ID: KB4111 KB Last Updated: 04 Jun 2010Version: 6.0
Summary:
Configuring an L2TP VPN Policy on the Juniper Firewall
Symptoms:

Solution:

Note: This article applies to ScreenOS 5.0 and above.

To configure an L2TP VPN policy on the Juniper Firewall, perform the following steps:

Step one: Open the WebUI. For an example of how to access the WebUI, consult: KB4060 - Accessing Your NetScreen, SSG, or ISG Firewall Using the WebUI

Step two: From the ScreenOS options menu, click Policies.

Image of step two

Step three: From the Policies screen, in the From drop-down menu, select Untrust. From the To drop-down menu, click to select Trust.

Image of step three and four

Step four: Click New.

Step five: From the Policies screen, in Source Address, click to select Address Book. From the Address Book drop-down menu, click to select Dial-Up VPN.

Image of step five and six

Step six: From Destination Address, click to choose New Address or Address Book.

Note: For this example, we have selected New Address, and have entered 192.168.1.50/24.

Step seven: From the Service drop-down menu, click to select Any, and then from the Action drop-down menu, click to select Tunnel.

Image of step seven

Step eight: From the Tunnel VPN drop-down menu, click to select a VPN.

Note: For this example, we have selected JohnDoeIKE.

Image of step eight and nine

Step nine: From the L2TP drop-down menu, click to select an L2TP tunnel.

Note: For this example, we have used sales_corp as the tunnel name. For more information on configuring the L2TP VPN tunnel, go to Configuring the L2TP VPN Tunnel on the Juniper Firewall.

Step ten: Click to select Position at Top.

Image of step ten and eleven

Step eleven: Click OK.

Related Links

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search