How to configure an interface for SNMP management

  [KB4118] Show Article Properties


Summary:
This article provides information on how to configure an interface for SNMP management.
Symptoms:
How to configure an interface for SNMP management.
Solution:

Note: This article is applicable to ScreenOS 4.0 or later.

To configure an interface for SNMP management, perform the following procedure:

Note: Before configuring an interface for SNMP management, you need to set up SNMP management on the NetScreen device. For more information on setting up SNMP management, go to Setting Up SNMP Management.

Step one: Open the WebUI. For more information on accessing the WebUI, you can open the webUI as per the link below:
                 
           Accessing Your NetScreen, SSG, or ISG Firewall Using the WebUI

Step two: From the NetScreen options menu, click Network, and then click Interfaces.

Image of step two

Step three: From the interface list, click to choose the interface you wish to modify, and click Edit.

Note: For this example, we chose to edit the Trust interface.

Image of step three

Step four: From the Management Services list, click to select SNMP.

Image of step four

Step five: Click OK.

Image of step five


FROM CLI:
set int ethernet1 manage snmp



Related Links: