Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] Converting a Juniper Firewall from Layer 3 Mode to Layer 2 Mode

0

0

Article ID: KB4272 KB Last Updated: 16 Jun 2010Version: 6.0
Summary:

Converting a Juniper Firewall  from Layer 3 Mode to Layer 2 Mode

Symptoms:


 

Solution:

Note: This article applies to ScreenOS 5.0 and higher.

When a device is reset to factory defaults, it comes up in layer 3 mode. In order to configure the box in Transparent mode, it must be converted to the layer 2 mode. This is performed using a console connection.


note: For more information on resetting the NetScreen to a factory default, go to: How Do I Perform a Hardware Reset of My NetScreen to Factory Default Settings?


To convert a NetScreen from layer 3 mode to layer 2 mode in ScreenOS 5.0, perform the following steps:

Access the NetScreen device via a console connection. For more information on accessing the NetScreen via a console connection, select your product from the list below:


From the NetScreen - HyperTerminal, enter unset interface ethernet1 ip, and press Enter.

Image of step two
 

Enter set interface ethernet1 zone V1-Trust, and press Enter.

Image of step three
 

Enter set interface ethernet2 zone V1-DMZ, and press Enter.

Image of step four
 

Enter set interface ethernet3 zone V1-Untrust, and press Enter.

Image of step five
 

note: The console will respond back with Changed to pure l2 mode.

Image of note
 

note: The device has now been converted to transparent mode.
 

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search