Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[EOL/EOE] Create a Device in NSM



Article ID: KB4281 KB Last Updated: 18 Oct 2020Version: 5.0
Note: A product listed in this article has either reached hardware End of Life (EOL) OR software End of Engineering (EOE).  Refer to End of Life Products & Milestones for the EOL, EOE, and End of Support (EOS) dates.
This article explains how to create a device in NSM.

To create a device in NSM, perform the following steps:

In this example, we will be modeling an HSC, running ScreenOS 5.0.0r3, operating in the Trust-Untrust operational mode.

Connect to NetScreen Security Manager. For more information, go to Connecting to the NetScreen Security Manager.

From the NSM, expand the Device Manager menu option, and then click to select FW/VPN Devices.

Image of step two and three

To add a new device, click +, then click to select Device.

Customize the device by specifying a device name.

Image of step four and five

Under Device Does Not Exist - Update Completes Workflow, click Model Device.

Click Next.

Image of step six

In the Device Type drop-down menu, click to select nsHSC-Trust-Untrust. Leave all other settings at the default and then click Finish.

The OS Version will automatically be populated with 5.0.

Image of step seven

Right-click Hardware Security Client, and then click to select Edit.

Image of step eight

To expand the Info menu option, click +, and then click to select Startup.

Image of step nine and ten

Click Set Password.

Enter and confirm a new password.

Image of step eleven and twelve

Click OK.

Specify any device specific parameters. To expand the Network menu option, click +, and then select Interface.

For this example, Interface, DHCP, and DNS options will be configured.

Image of step thirteen

Right click trust, and click to select Edit.

Image of step fourteen

Fill in the trust interface IP configurations.

Image of step fifteen

From the left pane, click DHCP. From the DHCP mode drop-down menu, click to select Server.

Image of step sixteen

Enter your DHCP Server settings.

Image of step seventeen

To continue configuring the DHCP settings, click the DHCP Server IP Pools tab.

Image of step eighteen

To configure DHCP Server IP Pools, click +.

Image of step nineteen

In the IP window, enter the beginning IP address of the IP Pool. From the Value drop-down menu, click to select End IP.

Image of step twenty and twenty-one

In the IP window, enter the IP address at the end of the dynamic IP range. Click OK.

From the left pane, select DNS.

Image of step twenty-two

Enter the appropriate DNS information, and then click OK.

Image of step twenty-three

Modification History:
2020-10-18: Tagged article for EOL/EOE.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search