Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] How is Traffic Shaping Bandwidth Allocated on My Juniper Networks NetScreen Device?

0

0

Article ID: KB4374 KB Last Updated: 25 Mar 2019Version: 5.0
Summary:

How is Traffic Shaping Bandwidth Allocated on My Juniper Networks NetScreen Device?

Solution:

This article applies to ScreenOS 4.0 and higher.

Traffic shaping bandwidth allocation is based on the egress (outgoing) interface that the packet traverses. For example, if traffic shaping is enabled for a trust to untrust zone policy, then the untrust interface bandwidth setting allocates the bandwidth requirements for that particular policy.

It is recommended that the sum of all traffic shaping policies used in a particular direction (trust to untrust, untrust to trust, etc.) should never exceed the egress interface bandwidth setting.

Modification History:

2019-03-24: Removed EOL products.

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search