Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] How Do I Enable Ping on the Public Interface?

0

0

Article ID: KB4400 KB Last Updated: 29 Mar 2021Version: 7.0
Summary:

This article answers the question: "How do I enable ping on a public interface?

Solution:

To enable ping on the public interface via the WebUI, perform the following procedure:

  1. Open the WebUI. For more information about accessing the WebUI, go to Accessing Your NetScreen Using the WebUI.

  2. From the NetScreen options menu, click Network, and then click Interfaces.

  1. In the interface list, from Untrust Zone, click Edit.

  1. From Other Services, click to select Ping.

  1. Click OK.

 

To enable ping on the public interface via the Command Line Interface (ssh/telnet/console), perform the following steps:

  1. Log on to the firewall via telnet/SSH/console.

  2. Type the following command:

set interface <interface-name> manage ping
Modification History:
  • 2020-04-21: Article reviewed for accuracy; article found to be accurate and valid

  • 2021-03-29: Article reviewed for accuracy, replaced old WebUI snapshots with new one and removed EOL device references

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search