[ScreenOS] How to enable ping management on the trusted interface

  [KB4410] Show Article Properties


Summary:
This article provides information on how to enable ping management on the trusted interface.
Symptoms:
How to enable ping management on the trusted interface.
Solution:
Note:
  • This article is applicable to ScreenOS 4.0 or later.
  • For VPN troubleshooting, enable ping management on both of the firewalls.

WebUI:

To enable ping management on the trusted interface, perform the following procedure:

  1. Open the WebUI. For more information on accessing the WebUI, refer to KB4317 - [ScreenOS] Accessing your Juniper firewall device using the WebUI.
  2. From the NetScreen options menu, click Network and then Interfaces:

    Image of step two

  3. Locate the ethernet1 interface and then click Edit:

    Image of step three

  4. From Service Options, select the Ping check box:

    Image of step four and five

  5. Click OK.


CLI:

The command to enable ping is as follows:
set interface  etherner1 manage ping
Modification History:
2019-05-22: Content reviewed for accuracy.  Affected product list updated.

 
Related Links: