Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

Installing and Configuring HA on the Secondary NSM Server via the GUI

0

0

Article ID: KB4519 KB Last Updated: 27 Aug 2010Version: 4.0
Summary:
Installing and Configuring HA on the Secondary NSM Server via the GUI
Symptoms:

Solution:

To install and configure HA on the Secondary NSM server via the GUI, perform the following steps:

noteIn this article, the example 172.24.29.90 was used as the IP address for the primary server and 172.24.55.76 was used for the secondary server. Other IP addresses were also used as examples.

Connect to the NSM server using SSH.

Start the HA server by executing the following command:

 

/usr/netscreen/HaSvr/bin/haSvr.sh start

 

Connect to the NetScreen-Security Manager. For more information on this, go to Connecting to the NetScreen-Security Manager.

noteAfter the HA server is started, you may need to wait for the GUI server and Device server to start.

Expand Server Manager, and then click to select Servers.

Image of step four


Select Device Server and click Edit.

From the Server Type drop-down menu, click to select Device Server Cluster.

Image of step six and seven

From the HA tab, in the IP Address of Secondary Server text box, enter the IP address. Click OK.

Select GUI Server and click Edit.

On the Main tab, from the Server Type drop-down menu, click to select GUI Server Cluster.

Image of step nine


From the HA tab, in the IP Address of Primary Server text box, enter the IP address. Click OK.

Image of step ten

Exit the NSM UI.

noteThe NSM HA installation is configured and ready to use.

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search