Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[NSM] How to view the VPN Phase 1 Pre-Shared Key in clear text

0

0

Article ID: KB4537 KB Last Updated: 09 Jul 2014Version: 5.0
Summary:

This article explains how to view the VPN Phase 1 Pre-Shared Key in clear text.

Note: This article does not apply to VPNs that were created on another device and imported into NSM. The information in this article is valid only for VPNs created through NSM.

Symptoms:

ScreenOS 5.0.0 and later does not display the VPN Phase 1 pre-shared key in clear text.

Cause:

Solution:

noteScreenOS 5.0.0 and later does not display the VPN Phase 1 pre-shared key in clear text. However, if the devices are managed from NetScreen Security Manager (NSM), NSM can display the pre-shared key in clear text.

To view the VPN Phase 1 pre-shared key in clear text, perform the following steps:

Log into NSM GUI client.

From the Devices menu, select Configuration, and click Summarize Config.

noteThe pre-shared key will display in clear text under IKE Gateway Commands.

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search