Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] Configuring WebTrends with the firewall



Article ID: KB4760 KB Last Updated: 25 Jun 2020Version: 5.0

Configuring WebTrends with the NetScreen firewall


To configure WebTrends, perform the following steps:

Step one: Open the WebUI. For an example of how to access the WebUI, consult: KB4060 - Accessing Your NetScreen, SSG, or ISG Firewall Using the WebUI

Step two: From the NetScreen console menu, click Configuration, select Report Settings, and then click WebTrends.

Step three: Click to select Enable WebTrends Messages.

Note: If you are sending WebTrends data through a VPN to a NetScreen (on the opposite end of the tunnel), click Use Trust Zone Interface as Source IP for VPN.

Step four: Enter the WebTrends Host Name / Port.

Note: For this example, we have used for a Host Name. It is recommended to leave the syslog port as the default, 514. Select the type of logs need to send to the WebTrend server. In above example, event logs will send to the WebTrend server.

Step five: Click Apply.
Modification History:
2020-06-25: Removed the old WebUI snapshots and replaced with new WebUI.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search