Support Support Downloads Knowledge Base Service Request Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[Archive] Generating a Certificate on a NetScreen-Remote Client

0

0

Article ID: KB4778 KB Last Updated: 04 Mar 2017Version: 8.0
Summary:
Generating a Certificate on a NetScreen-Remote Client
Symptoms:

Cause:

Solution:
Note: This article applies to:
  • NetScreen Series devices
  • SSG Series devices
  • ISG Series devices
  • J Series devices running:
    • JUNOS 9.4 and above
    • JUNOS with Enhanced Services 8.5 through 9.3


To generate a certificate on a NetScreen-Remote Client, perform the following steps:

Step one: From the System Tray, right-click on the NetScreen-Remote icon, and then click to select Certificate Manager.

Image of step one

Step two: From the Certificate Manager, click Request Certificate.

Image of step two

Step three: If an online certificate enrollment CA has not been configured, the following message will be display. Click Yes to continue to Step 4.

Image of step three

Step four: Enter your information in the Certificate Request form. Also, enter a filename (in the Request File section) to store the certificate request information. The request will be saved as a .req file.
  • If using NSR 8.2r1, do not enter a value for the IP Address field. Doing so will result in receiving a log event error of invalid RSA signature. If the error is received, generate a new certificate request using a DNS Name and/or Email Address.
  • If the CA requires fields that are not shown or a different format, check the box Enter Subject Name in LDAP format (located in the Subject Name section) and enter the full Domain Name.

Note: Contact your Certificate Authority to determine which fields are required. The Domain Name and/or Email must match the value configured for the user authentication on the NetScreen device.

Image of step four

Step five: Click OK.

Step six: Submit the certificate request file to your Certificate Authority.

Step seven: Now you are ready to import a certificate into the NetScreen-Remote Client. For more information, go to Importing Certificates into the NetScreen-Remote Client.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Security Alerts and Vulnerabilities

Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search