[KB4909] Show Article Properties
[KB4909] Hide Article Properties
To force the Secondary HA server to fail over to the Primary server, perform the following steps:
netstat -an | grep 7801
If the Secondary NSM server has the GUI server and Device server installed on two different systems, repeat Step 1 through Step 4 on both the GUI server and Device server.
Once the above steps are completed, the Primary server will be active and secondary will be shutdown. To start the Secondary server in the backup mode, login via SSH and execute the below command:
Login via the NSM GUI and verify that the Primary NSM server is Active and Secondary NSM server is in the stand-by mode.
© 1999 - 2017 Juniper Networks, Inc. All rights