Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

Missing interfaces and Mapped IPs on backup unit



Article ID: KB5496 KB Last Updated: 06 Oct 2020Version: 3.0
NetScreen Redundancy Protocol (NSRP) running Some VSYS configurations synchronized Missing interfaces and Mapped IPs on backup unit Interfaces and MIPs on one of VSYS not synchronizing Primary and backup configurations are different.
Interface inside VSYS has no VSD associated with it

Define the interfaces for the VSYS with a VSD identity.  The interface must be re-defined.

  1. Unset the VSYS.  From the command line interface (CLI):


get vsys [Enter]

Make a note of the VSYS ID corresponding to the VSYS name where the interface is not synchronizing to the backup unit. 


Assumption: VSYS Name is Test, and the VSYS ID is 10.  VSYS Test includes trust/10 and untrust/10 sub-interfaces.  These need to be bound to VSD 10.

From the CLI:


unset vsys Test [Enter]

set vsys Test vsd 10 [Enter]

set interface trust/10 ip  tag 10 vsd 10 [Enter]

set interface untrust/10 ip tag 20 vsd 10 [Enter]

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search