Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] What is the 'set mac' command?

0

0

Article ID: KB6120 KB Last Updated: 22 Jun 2010Version: 6.0
Summary:

What is the 'set mac' command?

Symptoms:

Symptom & Errors:

  • set mac command doesn't work
Solution:

The 'set MAC' command sets a static MAC address per interface to the MAC learning table of the ScreenOS firewall device. This command is only available on ScreenOS devices in transparent mode. If the device is in NAT or Route mode, the 'set MAC' command will not take any effect. There is no way to change the MAC address of the physical interface itself.

The syntax for the command is as follows:

set mac <mac-address> interface <interface-name> vlan <vlan id>

For more information, go to Transparent Mode Overview.

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search