Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

How to: Debug Dialup-to-LAN VPN

0

0

Article ID: KB6435 KB Last Updated: 31 Aug 2010Version: 4.0
Summary:
How to: Debug Dialup-to-LAN VPN
Symptoms:

Solution:

Telnet to the NetScreen device, capture and send Juniper Technical Support the results of the following commands:

1. get tech-support
2. clear dbuf
3. debug ike detail
4. Attempt to send traffic through the VPN tunnel
5. After sending some traffic, undebug ike detail
6. get dbuf stream
7. get log event

Then, from the NetScreen-Remote client, export the SPD file (but do not protect the file. Otherwise, NetScreen Support will not be able to read the configuration).

Here are the steps to exporting the NetScreen-Remote configuration file:

1. From the file menu, select Export Security Policy
2. Select the location of where you want to save the configuration file. The configuration file will have a .SPD extension. Do not Protect the exported file
3. Click Export
4. Obtain Log Viewer Files by right-clicking on the NSR taskbar icon and clicking Log Viewer and then click Save Log


Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search