Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

How do I find the current version of OS on my Netscreen?



Article ID: KB6489 KB Last Updated: 06 Jul 2010Version: 3.0

How do I find the current version of OS on my Netscreen?

Current version of ScreenOS

In ScreenOS 3.1.0 and below, from the WebUI, click the Configure button.  Screenshot below shows the current operating version:

To determine the current version on the CLI, this can be found from the command 'get system':

NAT_Router-> get system
Product Name: NetScreen-5GT
Serial Number: 0064062004016238, Control Number: 00000000
Hardware Version: 1010(0)-(00), FPGA checksum: 00000000, VLAN1 IP (
Software Version: 5.1.0r3a.0, Type: Firewall+VPN
Base Mac: 0010.db74.ed90
File Name: ns5gt.5.1.0r3a.0, Checksum: 241e461c

Date 04/24/2005 06:01:27, Daylight Saving Time enabled
The Network Time Protocol is Disabled
Up 0 hours 38 minutes 46 seconds Since 24 Apr 2005 05:22:41
Total Device Resets: 2, Last Device Reset at: 04/05/2005 05:47:25

Box in trust-untrust mode

System in NAT/route mode.

Use interface IP, Config Port: 80
User Name: netscreen

Interface trust:
  number 2, if_info 176, if_index 0, mode nat
--- more ---


Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search