Support Support Downloads Knowledge Base Service Request Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[Archive] What packets are routed to the VA?



Article ID: KB7018 KB Last Updated: 31 Aug 2010Version: 3.0
What packets are routed to the VA?
NetScreen Remote Virtual Adapter

The client's routing table determines what packets are sent via the VA. The operating system automatically updates the routing table to send packets to the VA at time of VA establishment. Note that many of the routing table changes are controlled within the operating system, such as the routing of an entire subnet to the VA. The actual subnet routed to the VA is dependent on the client IP address assigned by the gateway. For example, if the client is assigned a address, the entire class A network is routed to the VA. Whereas, if the client is assigned a address, the class B network.

Here is the problem or goal:

  • What packets are routed to the VA?

Problem Environment:

  • NetScreen Remote
  • Virtual Adapter

Applicable Products:

  • NetScreen-Remote

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Security Alerts and Vulnerabilities

Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search