Knowledge Search


×
 

Configure Multicast Routing Over IPSEC VPN

  [KB7691] Show Article Properties


Summary:
This article describes how to configure the multicast routing protocol over a route-based IPSEC VPN between two Juniper firewall devices. Two 5GTs running Screen OS 5.1 were used in the lab configuration and testing. The multicast routing protocol is not described in detail here. For further information, see the RFCs and other resources related to multicasting technology. This article describes the basic configuration and mode of operation supported by Screen OS. Juniper firewall devices supported IGMP version 1 to version 3 and PIM Sparse Mode only.
Symptoms:

Cause:

Solution:
Refer to the following document: Configuring Multicast Routing Over IPSEC VPN.
Related Links: