Support Support Downloads Knowledge Base Case Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] Why Redistributed or Exported OSPF Routes are not propagating to the NSRP Backup Firewall Device?

0

0

Article ID: KB9885 KB Last Updated: 25 Feb 2019Version: 5.0
Summary:
Scenario:  OSPF is enabled on an interface which belongs to a zone, bound to the untrust-vr.  OSPF routes are successfully learned on the NSRP master device on the untrust-vr and routes are successfully re-distributed to the trust-vr.  The OSPF routes on the untrust-vr are successfully sync'd over to the backup device (on the untrust-vr) using the route sync feature available on ScreenOS 6.3.0.  However, routes are not re-distributed to the trust-vr on the backup device.
Solution:
By default, routes are not re-distributed or exported if the original routing instance is on a VSD where the interface is inactive.  This behavior can be modified using the following command:
 
set vr untrust-vr adv-inact-interface
Modification History:
2019/02/21: Updated to a relevant version of ScreenOS, version 6.3.0
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search