Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

EX2200/EX3200 may experience low memory warnings



Article ID: TSB16779 TECHNICAL_BULLETINS Last Updated: 04 Mar 2017Version: 2.0
Alert Type:
PSN - Product Support Notification
Product Affected:
EX2200, EX3200 families of products
Alert Description:

Low available memory warnings (if less than 20% by default) may be logged on EX2200 and EX3200 switches.  Example:
Jul 4 13:05:43 switch /kernel: Percentage memory available(19)less than threshold(20 %)- 3
Jul 4 13:32:43 switch /kernel: Percentage memory available(19)less than threshold(20 %)- 4
Jul 4 14:20:33 switch /kernel: Percentage memory available(19)less than threshold(20 %)- 5
Jul 8 15:05:39 switch /kernel: Percentage memory available(18)less than threshold(20 %)- 11
The probability of this happening increases with newer versions of Junos, which require more memory in operation, particularly versions 12.3 and later.

EX2200 and EX3200 switches have 512MB of total memory, whereas other switches have 1GB or more.

There is no immediate service impact to the switch as a result of these messages, and can be safely ignored.  Memory utilization should be monitored.  If the available memory drops below 10%, then investigate the possibility of disabling features, reducing routing table sizes, etc.

At the 5% threshold, critical memory messages may be logged:

/kernel: KERNEL_MEMORY_CRITICAL: System low on free memory, notifying init (#1).
rpd[1255]: Processing low memory signal

At this point, automatic corrective actions can take place.  Service impact is expected.

As long as free memory does not fall below the 5% threshold, the switch operates normally.

This issue is tracked by PR900030


Here are some steps one can undertake on the EX2200/EX3200:
  1. Monitoring memory utilization to not going below 5%
  2. Disable unneeded features.  Examples could include Web-management
  3. In order to reduce switch memory usage, we can limit the number of concurrent telnet/ssh users.  Each session uses additional memory
  4. Open TAC case if memory warnings still show up after above actions are tried


1. Unconfigure features which are not mission critical.  Reduce routing/switching table sizes if possible.  It may help to reboot the system.

2. Limit the number of concurrent users on the switch.  Suggested limit is 1 or 2.


Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search