Support Support Downloads Knowledge Base Service Request Manager My Juniper Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

Configuration Image Validation is not supported on QFX platforms during software upgrade or downgrade

0

0

Article ID: TSB17508 TECHNICAL_BULLETINS Last Updated: 29 Jan 2020Version: 1.0
Alert Type:
PSN - Product Support Notification
Alert Description:
Configuration Image Validation is not supported on QFX platforms during upgrade or downgrade.
Solution:



With Configuration Image Validation the system validates that the existing configuration is compatible with the new image before the actual upgrade or downgrade commences.However due to product design QFX platforms where Routing Engine is running as VM ( virtual machine) , Configuration Image Validation is not supported.

Incase of any configuration compatibility issues between old image and new image, software upgrade will NOT be able to validate the configuration and system may not be able to apply the configuration when system comes up on newer software image after upgrade and traffic may get impacted until configuration is corrected and manually committed.

It is recommended, to test the compatibility of the configuration prior the the software upgrade on a non production QFX device.
 
  • Prepare a dedicated non-production QFX device already running newer  software version with factory default configuration.
  • Load the upgrade candidate’s configuration into the device and commit
    • ‚ÄčIf commit fails, correct the invalid configuration  and re-apply the configuration until commit is successful.
  •  Run ‘test configuration  <configuration path>’   to validate the  configuration of older software version for commit errors and syntax errors on the newer software version device
    • If the "test" fails, correct the invalid configuration and re-run test until all validation passes
    • If the test  succeeds, the candidate configuration could be upgraded


In case of any help, please contact JTAC or open the case in Case Manager.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Security Alerts and Vulnerabilities

Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search