PR Number |
Synopsis |
Category:EX2300/3400 platform |
1417839 |
EX3400 : "show chassis environment" repeats "OK" and "Failed" at short intervals
|
When the chassisd process receives incorrect values from LCMD for the RPM values, it changes the fan status to "Failed" from "Ok", and vice versa. |
PR Number |
Synopsis |
Category:QFX PFE L2 |
1469596 |
Ingress traffic might be blackholed if underlying interfaces flap in EVPN/VXLAN scenario
|
On QFX5000 platforms with Ethernet Virtual Private Network (EVPN) and Virtual Extensible LAN (VXLAN) scenario, if there is the underlying interface flaps for the core network side, all the ingress traffic might be backholed by the VXLAN Tunnel Endpoint (VTEP) due to this issue. |
PR Number |
Synopsis |
Category:common or misc area for SRX product |
1430941 |
Unable to launch J-Web when the device is upgraded through USB image.
|
On SRX5000 series, when the device is upgraded through USB image, J-Web is not available and needs to be installed through "request system software add optional://jweb-srx". |
PR Number |
Synopsis |
Category:BBE Remote Access Server |
1479697 |
The CoA request may not be processed if it includes "proxy-state" attribute
|
In a subscriber management environment, the CoA requests (such as deactivating/activating subscribers) sent from Radius server will fail if the "proxy-state" attribute is present. This attribute is still unsupported but will now be ignored if it's present in CoA requests. |
PR Number |
Synopsis |
Category:Class of Service |
1472083 |
Unexpected traffic loss might be discovered in certain conditions under fusion scenario
|
On MX platform with enhanced queuing MPC under fusion scenario, EP (Extended Port) hosted on multiple CPs (Cascade Port) which are from different PFEs on the same FPC. Unexpected traffic loss might be observed if a CoS policy with the knob "rate-limit" is applied. |
PR Number |
Synopsis |
Category:QFX Control Plane VXLAN |
1420764 |
Multicast MAC address might be learned in the Ethernet switching table on QFX5K/QFX10K platforms with EVPN-VXLAN configured
|
On QFX5K/QFX10K platforms with EVPN-VXLAN configured, multicast MAC address might be learned in the Ethernet switching table as the validation check is missed. |
PR Number |
Synopsis |
Category:Kernel software for AE/AS/Container |
1412215 |
Packet drop might be seen if native VLAN is configured along with flexible VLAN tagging
|
When the native VLAN is configured along with the flexible VLAN tagging on a L3 subinterface, untagged packets might be dropped on that L3 subinterface. |
PR Number |
Synopsis |
Category:JSR Infrastructure |
1450545 |
Traffic loss might occur when there are around 80,000 routes in FIB.
|
On SRX1500 platform, when there are around 800K routes in forwarding information base (FIB), traffic loss might occur and abnormal error messages of some CLI commands would appear due to lack of memory on packet forwarding engine (PFE). This issue has traffic impact. |
PR Number |
Synopsis |
Category:Security platform jweb support |
1431298 |
Junos OS: Path traversal vulnerability in J-Web
|
A path traversal vulnerability in the Juniper Networks Junos OS device may allow an authenticated J-web user to read files with 'world' readable permission and delete files with 'world' writeable permission. Refer to https://kb.juniper.net/JSA10985 for more information. |
PR Number |
Synopsis |
Category:FreeBSD Kernel Infrastructure |
1425608 |
The kernel crashes when removing mounted USB while a file is being copied to it
|
If you pulled out a USB from the system while files are being copied, the kernel will panic and the system will restart. |
1442376 |
EX2300 platforms might stop forwarding traffic or responding to console
|
On EX2300/EX2300-C platforms, if Junos OS is with FreeBSD kernel version 11 with the build date on or after 2019-02-12, the switch might stop forwarding traffic or responding to console. A reboot is required to restore the service. |
1454950 |
mgd error found during Junos 18.4R2.7 boot up and Junos did not work as expect
|
Packet Forwarding Engine sometimes does not come up after system reboot.Timeout is required to handle the fifo tx/rx error. Debug sysctls are been removed. Mutex been added to handle to race condition. |
1469400 |
Member of virtual chassis might reboot because of lack of watchdog patting
|
In virtual-chassis scenario on EX3400, if watchdog pat did not happen within stipulated time, member (master or backup or linecard) of virtual chassis might reboot automatically with "0x2:watchdog" as reboots reason. |
PR Number |
Synopsis |
Category:QFX access control list |
1464883 |
QFX5100-24Q: not able to apply dscp rewrite to firewall filter to a Layer 3 subinterface (e.g. xe-0/0/0.100)
|
When you try to apply a firewall filter that contains a "then dscp" action to a Layer 3 inet subinterface, you will get an error when trying to commit. Applying the same filter to an IRB interface succeeds as does applying the same filter to a Layer 3 subinterface on QFX5100-48S. |
PR Number |
Synopsis |
Category:Filters |
1464352 |
The dcpfe might crash when changing the firewall filter on QFX5K platforms
|
On QFX5K switches, when a firewall filter term is changed in scale conditions (such as, more than 2500 iRACL--ingress Routing ACL entries), the dcpfe might crash especially in make-before-break scenario. It might cause all interfaces in this FPC down. |