Search our Knowledge Base sites to find answers to your questions.
Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles19.1R2-S1: Software Release Notification for JUNOS Software Version 19.1R2-S1
Junos Software service Release version 19.1R2-S1 is now available.
19.1R2-S1 - List of Fixed issuesPR Number | Synopsis | Category: Marvell based EX PFE L2 |
---|---|---|
1474808 | Continuous dcpfe error messages and eventd process hogged might be seen on EX2300 VC scenario Product-Group=junos |
On EX2300 VC scenario, when host path packets are flooding through internal HG (higig) port, it might generate some dcpfe error messages which are harmless and eventd process hogged might also be seen. And it also might cause high CPU utilization which might affect protocol traffic. |
PR Number | Synopsis | Category: EX2300/3400 platform |
1477165 | EX3400 me0 interface might remain down Product-Group=junos |
The me0 interface of EX3400 does not come up when connected to 100m speed interface. |
PR Number | Synopsis | Category: DC PFE QoS |
1466770 | Slow packet drops might be seen on QFX5000 platforms Product-Group=junos |
The issue observed on QFX5000 platforms when there are any packets on the port before its buffer configuration is completed after the reboot. This issue is very rare and the window could be just few milli seconds. |
PR Number | Synopsis | Category: DHCP related Issues |
1467182 | [dhcp] [DHCP_RELAY]- JDI-_DHCP_-REGRESSION-SWITCHING:: DHCPvX ACK Messages did not receive response to Broadcast INFORM packets with 19.1R2.3 Product-Group=junos |
Few of DHCPvX INFORM Messages, specific to particular VLAN are not receiving any ACK from server. |
PR Number | Synopsis | Category: QFX PFE L2 |
1462171 | The LLDP function might fail when a Juniper device connects to a non-Juniper one Product-Group=junos |
On EX/QFX platforms with STP disabled, the LLDP function might fail when a Juniper device connects to a non-Juniper one. In this scenario, the LLDP PDU with destination MAC 01:80:c2:00:00:00, which is one of the three reserved MAC addresses for LLDP in IEEE 802.1AB, will be ignored by Juniper LLDP process, and this causes the LLDP function failure. This issue has service impact. |
1467466 | Few MAC addresses might be missing from MAC table in software on QFX5k platform. Product-Group=junos |
On QFX5k platform, if Packet Forwarding Engine process is restarted manually or device reboot occurs, some MAC address(es) might not be seen on software MAC table but MAC address will be present in hardware table. |
1469596 | Ingress traffic might be blackholed if underlying interfaces flap in EVPN/VXLAN scenario Product-Group=junos |
On QFX5000 platforms with Ethernet Virtual Private Network (EVPN) and Virtual Extensible LAN (VXLAN) scenario, if there is the underlying interface flaps for the core network side, all the ingress traffic might be backholed by the VXLAN Tunnel Endpoint (VTEP) due to this issue. |
PR Number | Synopsis | Category: QFX L3 data-plane/forwarding |
1455547 | The coredump might occur during adding/removing EVPN Type-5 routing instance Product-Group=junos |
On QFX platforms, the coredump might occur during adding/removing EVPN Type-5 routing instance. The EVPN route would be corrupted and traffic/service impact appears if hitting the issue. |
1463092 | When deleting IRB on the layer 3 gateway, IRB does not get removed from PFE and will blackhole traffic to IRB mac address Product-Group=junos |
On QFX5110/5120 platform as the layer 3 gateway, after deleting the configuration of interfaces irb, The IRB might not get removed from PFE and will blackhole traffic to the MAC address of the deleted IRB. |
1475819 | Traffic might not be forwarded over ECMP link in EVPN VXLAN scenario Product-Group=junosvae |
On QFX5110/QFX5120 platforms, when Traffic Load Balance is used in EVPN VXLAN scenario, traffic might not be forwarded over ECMP link after the ECMP link flapped. |
1477073 | GRE transit traffic does not forward in VRRP scenario Product-Group=junos |
On QFX5110 platforms, GRE transit traffic might be dropped when sending GRE tunnel packets with the destination MAC as VRRP MAC. It has a traffic impact. |
PR Number | Synopsis | Category: QFX PFE MPLS |
1477301 | The traffic may be lost over QFX5100 switch acting as a transit PHP node in the MPLS network Product-Group=junos |
In the MPLS network, the packets may get dropped by egress node if the packets go through the QFX5100 switch acting as a transit PHP (penultimate-hop popping) node. |
PR Number | Synopsis | Category: BBE Autoconfigured DVLAN related issues |
1467468 | L2 Wholesale not forwarding all client requests with stacked VLAN Product-Group=junos |
In the Non-ANCP Based L2 Wholesale scenario, if more than one request packets from customer side encapsulated in dual-tagged VLAN arrive at PE device, only the first one of the packets which share the same outer VLAN gets forwarded, and the rest will fail. |
PR Number | Synopsis | Category: Border Gateway Protocol |
1487691 | High CPU utilization might be observed when the outgoing BGP updates are sending slowly Product-Group=junos |
On all Junos platforms with the BGP routing protocols, the rpd process might go into a high CPU utilization causing slow network convergence. If a BGP peer is receiving and processing BGP updates slowly, this may cause the BGP output queue of the sending BGP peer to be full. When the queue is full it causes high CPU utilization of the BGP IO thread (bgpio, it is part of the rpd daemon) on the sending BGP peer. This defect could cause network-wide slow BGP network convergence. (See also https://kb.juniper.net/TSB17725) |
PR Number | Synopsis | Category: AAA Radius/TACACS Plus |
1468586 | NFX250: D496 to 18.4R2.7 upgrade is not working. Got OOM error while upgrade and box stuck not booting. Product-Group=junosvae |
Upgrading to 18.4R2 fails to boot. |
PR Number | Synopsis | Category: Layer 2 Control Module |
1473610 | ERP might not come up properly when MSTP and ERP are enabled on the same interface Product-Group=junos |
When both MSTP and ERP are enabled on the same interface, then ERP will not come up properly. |
PR Number | Synopsis | Category: MX10K platform |
1471372 | Sudden FPC shutdown due to hardware failure or ungraceful removal of line card may cause major alarms on other FPCs in the system Product-Group=junos |
On the MX10008/MX10016 platforms, If the FPC line card gets offline due to power failure or FPC Line card is removed from the chassis without prior offline of the card, other FPC line cards in the system will report fabric failures and fabric self-ping failures. The fabric self-ping failure will invoke disable-pfe action. Once PFE is disabled due to disable-pfe action, the line card needs to get restarted to recover. This issue will cause traffic loss. |
PR Number | Synopsis | Category: FreeBSD Kernel Infrastructure |
1425608 | The kernel crashes when removing mounted USB while a file is being copied to it Product-Group=junos |
If you pulled out a USB from the system while files are being copied, the kernel will panic and the system will restart. |
1442376 | EX2300 platforms might stop forwarding traffic or responding to console Product-Group=junos |
On EX2300/EX2300-C platforms, if Junos OS is with FreeBSD kernel version 11 with the build date on or after 2019-02-12, the switch might stop forwarding traffic or responding to console. A reboot is required to restore the service. |
1454950 | EX switches might not come up properly upon reboot Product-Group=junos |
EX switches might not come up properly upon reboot due to the date not been set up. |
1469400 | EX3400 might reboot because of lack of watchdog patting Product-Group=junos |
On EX3400, if watchdog pat did not happen within stipulated time and it might reboot automatically with "0x2:watchdog" as reboot reason. |
PR Number | Synopsis | Category: QFX Platform related (SYSLOG/ALARMS/miscellaneous) |
1466810 | EPR iCRC errors in QFX10000 series platforms might cause protocols down Product-Group=junos |
EPR iCRC errors in QFX10000 series platforms might cause protocols down. FPC will be in wedged state and will not pass traffic on that PFE if hitting this issue. EPR iCRC errors are normal and caused by transient hardware conditions. EPR iCRC errors are not expected to impact the protocols, and only one CRC failed packet will be dropped. But due to incorrect handling of this error, it affects protocols and causes FPC wedge. |
PR Number | Synopsis | Category: QFX PFE Class of Services |
1476829 | QFX Platforms are exhibiting invalid PFE PG counter pairs to copy, src 0xfffff80, dst 0 Product-Group=junos |
On QFX Series Switches the following logs might be displayed as a result of polling class of service related SNMP OIDs. These messages might eventually lead to interface counters not being populated properly. There is no other impact from these messages. Nov 19 07:00:07 switch kernel: et-0/0/33: invalid PFE PG counter pairs to copy, src 0xfffff8012285d720, dst 0 Nov 19 07:00:07 switch kernel: et-0/0/36: invalid PFE PG counter pairs to copy, src 0xfffff800076df570, dst 0 Nov 19 07:00:07 switch kernel: et-0/0/37: invalid PFE PG counter pairs to copy, src 0xfffff8012285d750, dst 0 Nov 19 07:00:07 switch kernel: et-0/0/40: invalid PFE PG counter pairs to copy, src 0xfffff800076df480, dst 0 Nov 19 07:00:07 switch kernel: et-0/0/44: invalid PFE PG counter pairs to copy, src 0xfffff800255374e0, dst 0 Nov 19 07:00:07 switch kernel: et-0/0/45: invalid PFE PG counter pairs to copy, src 0xfffff800076df420, dst 0 Nov 19 07:00:07 switch kernel: et-0/0/46: invalid PFE PG counter pairs to copy, src 0xfffff800076de390, dst 0 Nov 19 07:00:07 switch kernel: et-0/0/47: invalid PFE PG counter pairs to copy, src 0xfffff800076df210, dst 0 Nov 19 07:00:07 switch kernel: et-0/0/48: invalid PFE PG counter pairs to copy, src 0xfffff800076dff30, dst 0 |
PR Number | Synopsis | Category: Filters |
1480776 | ARP request packets for unknown host might get dropped in remote PE in EVPN-VXLAN scenario Product-Group=junos |
In EVPN-VXLAN environment, when local CE sends ARP request packets for unknown host, the packets will hit firewall-host queue in remote PE. It might trigger DDoS protection policer violations for firewall-host queue hence the ARP request packets might get dropped. |
PR Number | Synopsis | Category: QFX L2 PFE |
1473521 | The l2ald crash might be seen when around 16k VLAN-ID is sharing the same VxLAN tunnel and PFE is rebooted Product-Group=junos |
On EX, MX and QFX platform, l2ald might crash when around 16k VLAN-ID is sharing the same VxLAN tunnel and PFE is restarted. After this issue happened, MAC address table is not cleared and layer 2 transcation could works normally. In the end, traffic or service is not affected. This issue is not reproducable. |
1473685 | The RIPv2 packets forwarded across a L2circuit connection might be dropped Product-Group=junos |
When RIPv2 routes are received on a QFX5100/EX4600 platforms, either to or from an L2 circuit connection, such packets are not propagated. This includes directed unicast RIPv2 packets. |
1474545 | Continuous error log messages might be raised on QFX5K platforms in EVPN/VXLAN scenario Product-Group=junos |
In EVPN-VXLAN scenario, when an SP style interface is configured both with native-vlan-id and LLDP on QFX5000 platforms, continuous log messages might be observed. |
PR Number | Synopsis | Category: QFX L3 data-plane/forwarding |
1456336 | Link up delay and traffic drop might be seen on mixed SP L2/L3 and EP L2 type configs Product-Group=junos |
This PR includes three issues. First one: When Layer3 IFL (logical interface) is configured first and then Layer2 IFL is configured, MAC move might not happen. Second one: On Vxlan setup with large number of child interfaces, link up delay is seen. Third one: In case of VLAN setup with Enterprise/Service Provider L2 and L3 type configs, when all the configs are done in single commit statement then the traffic might not be forwarded. |
PR Number | Synopsis | Category: QFX MPLS PFE |
1469998 | If continuous interface flaps at ingress/egress of PE devices, IP routed packets might be looped on the MPLS PHP node Product-Group=junos |
On QFX5K platform, when MPLS node-link-protection is configured on all nodes (PE and P device), the IP routed packets might be looped on the MPLS PHP node (P device) if continuous interface flaps at ingress/egress of PE devices. |
PR Number | Synopsis | Category: QFX VCCP |
1454343 | Master FPC might come up in master state again after reboot instead of backup Product-Group=junos |
In QFX5110-32Q VC with 100G VCP links, if the master switch with the lowest MAC address reboot, it might come up in the master state again instead of backup. This can have outage around ten minutes and packets loss. |
PR Number | Synopsis | Category: MPC7/8/9 Interface Issues |
1463015 | An interface might get stuck in down state on certain MX platforms Product-Group=junos |
The interfaces on certain MX platforms might get stuck in a down state, if the remote interface sends invalid code to the local interface. Link might not come up even after the remote peer has begun sending a good signal. |
PR Number | Synopsis | Category: Trio pfe qos software |
1436872 | With CNH enabled, the MPLS COS rewrite does not work for 6PE traffic Product-Group=junos |
On MX platforms with Chained Composite Next Hop (CNH) for labeled BGP configured, the MPLS COS rewrite does not work for 6PE traffic. This issue has service/traffic impact. |
PR Number | Synopsis | Category: UI Infrastructure - mgd, DAX API, DDL/ODL |
1438144 | (SEEN ONLY ON LEGACY IMAGE) ISSU is failing from 19.1R1 legacy Junos release images Product-Group=junos |
ISSU from 19.1R1 Legacy Junos images impact the commits on the device |
Getting Up and Running with Junos
Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search