Search our Knowledge Base sites to find answers to your questions.
Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles20.2R1-S1: Software Release Notification for JUNOS Software Version 20.2R1-S1
Junos Software service Release version 20.2R1-S1 is now available.
PR Number | Synopsis | Category: NFX Layer 3 Features Software |
---|---|---|
1511306 | NFX150: ZTP over LTE config commit failed for "operation=create" in xml operations configuration Product-Group=junos |
NFX150: ZTP over LTE config commit failed for "operation=create" in xml operations configuration |
PR Number | Synopsis | Category: JUNOS kernel/ukernel changes for ACX |
1515835 | VMcore observed while running stability test in a multi dimensional scenario. Product-Group=junos |
This is a Stability test performed on a scaled set-up with traffic , involving L2VPN,VPLS,EVPN,L2PT,L3VPN,6PE,6VPE,OSPF etc sessions running. And there are a series of events performed, like interface flap, deactivate/activate all protocols, deactivate/activate L2 circuit ,and then deactivate/activate routing instance. These series of events are performed in a loop and the issue is not seen in the first iteration, it is seen in the subsequent iterations after the step deactivate/activate routing instance. |
PR Number | Synopsis | Category: "agentd" software daemon |
1516290 | JDI_BBE_REGRESSIONS: Active sensor check is failing while checking show agent sensors |display xml command Product-Group=junos |
Active sensor check is failing while checking show agent sensors |display xml command |
PR Number | Synopsis | Category: Application Quality of Experience related PRs |
1513461 | CSO 5.1.2 : FLOWD : With CSO SDWAN configuration loaded, FLOWD cores seen while deleting GRE_IPSEC configuration Product-Group=junos |
The flowd_octeon process restarts unexpectedly when deleting a GRE IPSec tunnel. |
PR Number | Synopsis | Category: Border Gateway Protocol |
1508888 | The rpd might crash on backup RE if BGP (standby) received a route from peer which is rejected due to invalid target community Product-Group=junos |
In L3VPN scenario, the rpd(routing protocol process) on backup RE might crash when BGP(standby) received a VPN route from peer which is rejected due to invalid target community and the BGP standby peer synchronization is not complete yet. |
PR Number | Synopsis | Category: PFE SW evo-pfemand,packet-io on BRCM platforms running EVO |
1499009 | QFX5220 does not support the following matches which were supported on QFX5200: first-fragment, tcp-established, Is-fragment, and Hop-limit. Product-Group=junos |
QFX5220 does not support the matches that were supported on QFX5200: ? first-fragment ? tcp-established ? Is-fragment ? Hop-limit |
PR Number | Synopsis | Category: MX Platform SW - FRU Management |
1502118 | The chassisd process may get stuck Product-Group=junos |
On the MX240, MX480, and MX960 platforms Chassisd process can be stalled if there is a front SCBE port malfunction. This front port is only used for Node Slicing systems, please avoid using sfp there in non Node Slicing cases to workaround the issue. |
PR Number | Synopsis | Category: CFM |
1518744 | There might be memory leak in cfmd if both CFM and inet/IPv4 interfaces are configured Product-Group=junos |
If Connectivity Fault Management (CFM) and inet/IPv4 interfaces are configured, there is memory leak in cfmd when an update event for inet/IPv4 interface (like interface activating) occurs. The memory leak might be outstanding if there are continuous update events on large-scale inet/IPv4 interfaces. The high memory leak issue mostly happens on ACX platform. For other platforms, the leak might be very less. |
PR Number | Synopsis | Category: ChassisD changes specific for DNX series. |
1520326 | Odin : ACX710 : Alarm port configuration not cleared after deleting the alarm-port. Product-Group=junos |
delete chassis alarm-port will not delete the alarm port configuration and show chassis craft-interface will display the old configuration. |
PR Number | Synopsis | Category: DNX L2 related features |
1517074 | L2ALD crash is seen during stability test with traffic on scaled set-up. Product-Group=junos |
The L2ALD process on an ACX platform may restart unexpectedly during interface flaps. |
PR Number | Synopsis | Category: Layer 3 forwarding, both v4+v6 |
1519372 | IPV6 neighbor state change causes "Local Outlif" to leak by two values leads to DNX_NH::dnx_nh_tag_ipv4_hw_install errors Product-Group=junos |
On ACX5448/ACX5448-D, PFE memory exhaustion is reported due to continuous IPv6 neighbor flaps. |
PR Number | Synopsis | Category: software upgrade infra issues |
1470943 | Block unified ISSU commands from the CLI for Junos OS Evolved Release 19.4R1. Product-Group=junos |
Since ISSU is not supported in Junos OS Release 20.2R1 for PTX10008, following commands are removed/blocked from CLI 1. request system software validate-restart 2. Request system software add <> restart 3. show system software add-restart. |
PR Number | Synopsis | Category: EVPN Layer-2 Forwarding |
1520078 | Unable to create a new VTEP interface Product-Group=junos |
In all platforms with VXLAN Static VTEP tunnels scenario (including Static VXLAN without EVPN), after RE switchover or restart of l2-learning, if create a new VTEP interface, the interface may not work. |
PR Number | Synopsis | Category: jdhcpd daemon |
1506418 | [subscriber_services] [all] JDI_BBE_REGRESSION: DHCPV6 leasequery is not as expected while verifying the DHCPV6 server statistics. Product-Group=junos |
DHCPV6_LEASEQUERY counter may not be as expected in "show dhcpv6 server statistics" output |
PR Number | Synopsis | Category: Firewall Network Address Translation |
1525822 | NAT: NAT PBA size 1 on all products Product-Group=junos |
To address the customers' requirements, the PBA size should support a minimum of 8 on vSRX2.0 and vSRX3.0. Considering the PBA size range is 1~64k on SRX5k, we enhance the range to 1~64k on all platforms to align the behavior cross products. CLI warning message is provided when PBA size smaller than 64 on low-end products(no srx5k). When the PBA size is small, there may be not enough memory, syslog can be generated if the NAT source pool fails to be created due to memory shortage. |
PR Number | Synopsis | Category: Firewall Policy |
1500938 | The srxpfe/flowd process might crash due to memory corruption within JDPI Product-Group=junos |
On SRX/MX platforms, if there are any services (e.g. AppID, IDP, APBR and so on) running based on Juniper Deep Packet Inspection (JDPI), when the work load is reaching heavy level, for example, above 50% of max connection per second for Layer 7 security policy, or 30% for IDP, the srxpfe/flowd process might crash due to memory corruption caused by this issue. |
1519222 | Junos upgrade may encounter failure in certain conditions when enabling Advanced Threat Prevention Product-Group=junos |
On all SRX platforms with Advanced Threat Prevention setup, upgrade to 20.2R1 may encounter failure. This defect could be seen when there is a security policy referencing SecProfiling threat-feeds (Adaptive Threat Profiling) in source-address or destination-address field during the upgrade process. |
PR Number | Synopsis | Category: Multiprotocol Label Switching |
1502993 | CSPF job might get stalled for new/existing LSP in high scale LSP setup Product-Group=junos |
On all Junos platforms under MPLS-TE scenario with high scale LSPs (e.g., 20K), CSPF job might get stalled for new/existing LSP if some configuration changes (which impacts the rpd process) are done when CSPF job is suspended and pending. TED (Traffic Engineering Database) CSPF (Constrained Shortest Path First) job goes in a state where it is not able to recover till the time rpd process is restarted. This defect could only be observed in 20.2R1 or 20.2R1-EVO release. |
PR Number | Synopsis | Category: OS IPv4/ARP/ICMPv4 |
1511833 | The kernel may crash causing the router or the RE to reboot if making virtual IP related change Product-Group=junos |
On all Junos platforms with VRRP enabled, If delete and add any configuration which involves the virtual IP in the same commit, the kernel might crash. When this happens, the system or the RE will reboot. |
PR Number | Synopsis | Category: Chassis mgmt for all QFX systems - chassis MIB, alarms, CLI |
1511155 | The QFX10000-36Q line card used on QFX10008/QFX10016 platforms may fail to detect any QSFP Product-Group=junos |
On QFX10008/QFX10016 platforms with QFX10000-36Q line card used, if detecting an ASIC error of the line card, the QSFP might not be detected and then the PIC might be offline. |
PR Number | Synopsis | Category: QFX L2 PFE |
1500825 | On the QFX5000 switches, ERPS might not work correctly. Product-Group=junos |
On QFX5k platforms, Ethernet ring protection switching (ERPS) might not work correctly due to ERPS instance programming failure in hardware which might cause loop in the network. |
PR Number | Synopsis | Category: KRT Queue issues within RPD |
1505769 | Traffic flow might be blocked if MTU configured under IFD is greater than MTU configured under IFF Product-Group=junos |
On EVO platforms, if MTU configured under physical interface (IFD) is greater than MTU configured under same interface with family inet or family inet6 (IFF), aftmand might have catastrophic event. In the end, no traffic could be forwarded by aftmand. Please make sure IFD MTU need to be configured with smaller value than IFF MTU. |
1514393 | cRPD: Assigning an IFL to a VRF may not always work Product-Group=junos |
When physical and logical interfaces are in different network namespaces and only the logical interface is assigned to cRPD, cRPD fails to set the state properly, resulting in the interface state being marked as down by RPD and unable to make use of it for routing. |
PR Number | Synopsis | Category: Bug and Review Tracking for Segment routing traffic eng |
1513583 | Modifying the segment list of the SR LSP might not work Product-Group=junos |
If "source-packet-routing segment-list" is configured, change in the number of hops might not be able to trigger route change with updated segment list. |
PR Number | Synopsis | Category: security-intelligence feature on SRX |
1524284 | Adaptive Threat Profiling would stop submitting new IP addresses to a feed after a limit of 10,000 had been reached Product-Group=junos |
Adaptive Threat Profiling would stop submitting new IP addresses to a feed after a limit of 10,000 had been reached |
PR Number | Synopsis | Category: MPC7/8/9 Interface Issues |
1513321 | The wavelength configured via CLI might not be set on SFP+-10G-T-DWDM-ZR optics when the optics is used on MPC7E line card Product-Group=junos |
The code change in PR 1410877 (which is fixed in 19.1R1 19.2R1) broke the wavelength configuration for tunable optics on MPC7E line card. After configuring 'interfaces <> optics-options wavelength' for interfaces using SFP+-10G-T-DWDM-ZR optics on MPC7E line card, the wavelength configured might not take effect on these interfaces. |
PR Number | Synopsis | Category: UI Infrastructure - mgd, DAX API, DDL/ODL |
1500569 | Unexpected behaviour during "| display inheritance" when foreground is deactivated Product-Group=junos |
The display of "| display inheritance" is blank when the foreground stanza is deactivated |
PR Number | Synopsis | Category: ZT pfe infra issues |
1478540 | Interface traffic statistics in CLI command "show interface" may display incorrect values for a LAG with MPC10/MPC11 child links Product-Group=junos |
On an MX series router with MPC10/11 mixing with the other type of MPC cards in a LAG bundle, the "show interface" CLI command might display incorrect traffic statistics. This might be triggered when an MPC10/11 child link is removed from a LAG with child links hosted on other MPC models. |
PR Number | Synopsis | Category: NFX Layer 3 Features Software |
---|---|---|
1518939 | NFX150 : Observing throughput degradation in RIOT-OVS-Fortigate-OVS-FlowD and RIOT-OVS-FlowD-OVS-Fortigate-OVS-FlowD cases Product-Group=junos |
Observing 29% degradation in 20.2R1 in both downstream and upstream of RIOT-OVS-FlowD-OVS-Fortigate-OVS-FlowD case when comparing 20.2R1 results with 20.1R1. And observing 65% degradation in 20.2R1 in upstream of RIOT-OVS-Fortigate-OVS-FlowD case when comparing 20.2R1 results with 20.1R1. |
PR Number | Synopsis | Category: L2NG bug tracking |
1519716 | DHCP:ipv6 address not getting assigned from DHCP ip pool Product-Group=junos |
Updaed in 2020.7.2 The issue is not fixed in JUNOS_202_R1.10, and will fix in JUNOS_202_R1_S1. The issue will cause SRX1500 can't send router advertise message out and cause basic IPv6 DHCP issue. Now the root cause is still investigated. But from my test, the issue can't be seen in RELEASE_202_THROTTLE, and the fix code of PR 1511744, 1516274, 1521263 might need be ported to the JUNOS_202_R1_BRANCH. |
PR Number | Synopsis | Category: JUNOS kernel/ukernel changes for ACX |
1483959 | [ISSU] JDI ACCESS REGRESSION: ISSU : Traffic loss is observed during unified ISSU upgrade on ACX5048. Product-Group=junos |
The Issue is seen during unified ISSU to Junos OS Release 20.1,20.2,19.4, 19.3 releases on acx5048 The upgrade happens without any issue , but the ports are not being enabled in PFE. As a result, forwarding is affected. |
1509402 | PFE crash might be seen and the FPC may remain down on ACX710 platform. Product-Group=junos |
On ACX710 platform, the PFE might crash and the FPC may remain down. This issue might occur when the PTP(Precision Time Protocol) is configured and removed, and then the router is rebooted. This issue happens when the DMA in QAX device goes in bad state when host bound PTP traffic is pumped and router rebooted. This causes the router to crash and not come up. |
PR Number | Synopsis | Category: Bi Directional Forwarding Detection (BFD) |
1453705 | On the MX2010 Series routers, the BFD session on the IS-IS step up flaps during the ISSU - FRU upgrade stage. Product-Group=junos |
Bfd session flaps during ISSU only in mpc7e card(Bfd sessions from other cards of DUT to peer routers did not flap during ISSU). Issue is not seen frequently. |
PR Number | Synopsis | Category: BGP Openconfig and Sensor |
1512773 | RPD might core rarely in case of heavy network churn when telemetry streaming is in progress Product-Group=junos |
There is a small window during BGP neighbor or BGP RIB periodic streaming when the background telemetry job gets suspended, there is a possibility that the node which is being rendered will be deleted/modified. If we are in middle of rendering value for that particular node, RPD might crash when telemetry job resumes since the node is no more valid. |
PR Number | Synopsis | Category: PFE SW evo-pfemand,packet-io on BRCM platforms running EVO |
1499009 | QFX5220 does not support the following matches which were supported on QFX5200: first-fragment, tcp-established, Is-fragment, and Hop-limit. Product-Group=junos |
QFX5220 does not support the matches that were supported on QFX5200: ? first-fragment ? tcp-established ? Is-fragment ? Hop-limit |
PR Number | Synopsis | Category: PRs related to channelized E1/T1 mic |
1474449 | Changing the framing modes on a CHE1T1 MIC between E1 and T1 on a MPC3E NG HQoS line card causes the PIC to go offline. Product-Group=junos |
Changing framing modes on a CHE1T1 MIC between E1 and T1 on a MPC3E NG HQoS line card will cause the PIC to go offline. |
PR Number | Synopsis | Category: EVPN ELAN/E-TREE |
1498519 | ACX710:EVPN:MPLS Traffic BUM failure seen when testing evpn flood group Product-Group=junos |
Ethernet packets with the same MAC address in the source address and the destination address fields are not forwarded. |
PR Number | Synopsis | Category: jdhcpd daemon |
1504266 | [subscriber_services] [all] JDI_BBE_REGRESSIONS :: DHCP subscribers count is not as expected after sending a LQ/BLQ Trigger after clearing the binding at Relay Product-Group=junos |
Subscriber recovery in relay using LQ/BLQ will fail. |
PR Number | Synopsis | Category: Flow Module |
1486903 | The flowd/srxpfe process might crash on SRX device when AppID is used. Product-Group=junos |
In HA environment, with heavy traffic over a long period of time, AppID module in SRX can cause core. |
PR Number | Synopsis | Category: JSR Infrastructure |
1479156 | vSRX may restart unexpectedly Product-Group=junos |
The srxpfe process generates core files when a socket-open error occurs during the initialization phase. Self-healing takes place when the srxpfe reboots and starts processing traffic. |
PR Number | Synopsis | Category: Layer 2 Control Module |
1473610 | ERP might not come up properly when MSTP and ERP are enabled on the same interface. Product-Group=junos |
When both "Multiple Spanning Tree Protocol " (MSTP) and Ethernet Ring Protection Switching" ERPS are enabled on the same interface, then ERPS does not come up properly. |
PR Number | Synopsis | Category: Multicast for L3VPNs |
1520568 | HRS with min-rate works fine with Selective Ingress Replication provider-tunnel. Incase of RSVP-TE P2MP as provider-tunnel MBB may happen during network triggers and it may leads to more than ~50ms traffic loss. Product-Group=junos |
HRS with min-rate works fine with Selective Ingress Replication provider-tunnel. Incase of RSVP-TE P2MP as provider-tunnel MBB may happen during network triggers and it may leads to more than ~50ms traffic loss. Here in this particular scenario where RSVP-TE P2MP I-PMSI + S-PMSI provider tunnel is used when we do access-link failure MBB is happening and leading to more than ~3s traffic loss. Even with S-PMSI provider-tunnel also we are seeing the same issue. |
PR Number | Synopsis | Category: QFX EVPN / VxLAN |
1510794 | QFX5K : EVPN-VXLAN : EVPN-VXLAN : Multicast traffic loss due to few multicast routes missing in Spine node Product-Group=junos |
In an EVPN-VXLAN scenario, multicast traffic may not reach to Spine to form (S,G) in PIM enabled Spines. Issue might happen due to various triggers including multiple rollback of configs on Spine, interface flap, clear bgp. |
PR Number | Synopsis | Category: RPD Next-hop issues including indirect, CNH, and MCNH |
1501935 | VPN traffic gets black-holed in a cornered L3VPN scenario Product-Group=junos |
in certain corner configuration, where in L3VPN scenario, there are 2 EBGP (1 multihop and 1 single-hop) and 1 IBGP between CE and PE, "equal-external-internal" may not work correctly with L3VPN composite-next-hop knob enabled. |
PR Number | Synopsis | Category: Trio pfe bridging, learning, stp, oam, irb software |
1493723 | Traffic loss is observed after ISSU, while enable/disable and activate/deactivate the interface Product-Group=junos |
Traffic loss is observed after ISSU, while enable/disable and activate/deactivate the interface |
PR Number | Synopsis | Category: DDos Support on MX |
1464549 | With multiple different fixed-sized traffic streams configured at 1000000 fps (40 gbps combined rate) on an aggregated Ethernet0 along with another independent aggregated Ethernet (aggregated Ethernet1, 50 percent line rate 4 streams bi-directional => 118 gbps combined traffic rate) both hosted on a single Packet Forwarding Engine instruction of MPC11E line card, causes small varying packet drops every iteration on the aggregated Ethernet1 on disabling the aggregated Ethernet0. The drops might vary from 200 Product-Group=junos |
With multiple different fixed-sized traffic streams configured at 1,000,000 fps (40 Gbps combined rate) on aggregated Ethernet0 along with another independent aggregated Ethernet interface (aggregated Ethernet1, 50 percent line rate 4 streams bidirectional => 118 Gbps combined traffic rate), both hosted on a single Packet Forwarding Engine instruction of an MPC11E line card, small varying packet drops occurs for every iteration on aggregated Ethernet1 on disabling aggregated Ethernet0. The drops might vary from 200 to certain 1000 frames. |
PR Number | Synopsis | Category: VNID L2-forwarding on Trio |
1517591 | no-arp-suppression was required for MAC learning to happen across the EVPN domain on static VTEP Product-Group=junos |
no-arp-suppression was required for MAC learning to happen across the EVPN domain on static VTEP |
PR Number | Synopsis | Category: ZT pfe l3 forwarding issues |
1456816 | On the MPC11E line card, the FIB download rates are lower than MPC10E by 30 percent. Product-Group=junos |
MPC11E: Effective FIB download rate of an MPC11E is lower than that of MPC10E by 30% because MPC11E has 8 targeted PFEs while MPC10E has 2-3 targeted PFEs. |
1474146 | For MPC10E card line, the IS-IS and micro BFD sessions does not come up during baseline. Product-Group=junos |
For the MPC10E card line, the IS-IS and micro-BFD sessions do not come up during baseline. |
PR Number | Synopsis | Category: usf hcm related issues |
1520395 | AUTO-CORE-PR : JDI BBE REGRESSION : flowd_spc3_mx core found @ msubsc_process_vbf_blob_handler msubsc_process_vbf_gencfg_blob ft_event_process_mp Product-Group=junos |
flowd_spc3_mx core found @ msubsc_process_vbf_blob_handler msubsc_process_vbf_gencfg_blob ft_event_process_mp |
PR Number | Synopsis | Category: usf traffic load balancing relared issues |
1499655 | After GRES, Some of the Vrirtual Services are not UP. Product-Group=junos |
After GRES, Some of the Vrirtual Services are not UP. |
Getting Up and Running with Junos
Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search