Search our Knowledge Base sites to find answers to your questions.
Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles18.4R3-S5: Software Release Notification for JUNOS Software Version 18.4R3-S5
Junos Software service Release version 18.4R3-S5 is now available.
PR Number | Synopsis | Category: EX4300 PFE |
---|---|---|
1456879 | The traffic for some VLANs might not be forwarded when vlan-id-list is configured Product-Group=junos |
On EX4300 Series switches, if the vlan-id-list is used on one interface, the traffic for some VLANs under the vlan-id-list might not be forwarded. |
PR Number | Synopsis | Category: EX2300/3400 PFE |
1427075 | VC split after network topology changed Product-Group=junos |
In Virtual Chassis scenario, when the interfaces flaps or VLAN configuration is changed frequently, the network topology will be changed accordingly, then CPU utilization will be dramatically increased to very high within a short time, which might cause the failure of essential communications between VC master and members. When the failure happens, FPC will automatically restart. As a result, VC is split and traffic is lost. |
PR Number | Synopsis | Category: QFX Access control list |
1403001 | Filter install will be failed due to no resource Product-Group=junos |
QFX5120 will show as "No resources for operation " during installing filter QFX5120 switches with VXLAN configured, user configured ACLs are limited to only one type (iRACL, iVACL or iPACL). But in this case there is only IPACL no other filter config |
1514570 | Scale of filters with egress-to-ingress command is enabled. Product-Group=junos |
With the 'egress-to-ingress' knob enabled, the filter installation fails if the number of filter entries configured is more than 1K. |
1521763 | Firewall "sample" configuration gives the warning as unsupported on QFX10002-36q and will not work. Product-Group=junos |
On QFX10002-36q, when inline-jflow is configured, the IPv4 firewall filter with 'sample' action gives a waring "unsupported platform" and will not work. On the other hand, the IPv6 firewall filter with 'sample' action will still work as expected. |
PR Number | Synopsis | Category: BBE Remote Access Server |
1517507 | GX-PLUS: CCR-T doesn't contain the Usage Monitoring information Product-Group=junos |
On subscriber termination, CCR-T is sent to the PCRF server reporting the same. But this doesn't contain the Usage monitoring information. |
1518016 | JUNOS CLI [show network-access aaa subscribers statistics username "<>"] fails to fetch Subscriber-specific AAA statistics information if an subscriber username includes space Product-Group=junos |
Subscriber username with space in between is not displayed by [show network-access aaa subscribers statistics username "<>"] command |
PR Number | Synopsis | Category: QFX Access Control related |
1515972 | "dot1x" memory leak Product-Group=junos |
Memory leak is seen in 'dot1xd' daemon when no 'dot1x' is configured. Memory leak is seen for the allocation while creating socket from 'dot1xd' daemon to 'authd' daemon. If 'authd' is not running , 'dot1xd' daemon tries to connect to 'authd' periodically and every time it was allocating memory for string "/var/run/authd_control" for socket creation. The memory does not free in this scenario and we see memory leak for string "/var/run/authd_control". There will be no service impact to other services/daemons other than dot1x. |
PR Number | Synopsis | Category: EVPN Layer-2 Forwarding |
1520078 | Unable to create a new VTEP interface Product-Group=junos |
In all platforms with VXLAN Static VTEP tunnels scenario (including Static VXLAN without EVPN), after RE switchover or restart of l2-learning, if create a new VTEP interface, the interface may not work. |
1521199 | The l2ad process might crash when EVPN-DCI session is teared down by MP-BGP-EVPN peer Product-Group=junos |
On EVPN-VXLAN scenario, when EVPN-DCI session is teared down by MP-BGP-EVPN peer, the l2ald process might crash with a core file generated in all VTEPs. It might cause total EVPN-VXLAN fabric bring down and entire network impact. |
PR Number | Synopsis | Category: Express PFE CoS Features |
1509220 | Traffic might be affected on QFX10002/QFX10008/QFX10016 platform Product-Group=junos |
On QFX10002/QFX10008/QFX10016, on the interfaces which map to h/w stream 0, if enhanced transmission selection (ETS), which in JunOS implementation is Hierarchical port scheduling configurations, change while high rate traffic is flowing, the chip might be wedged, thus no traffic flow is seen. Hierarchical port scheduling is the Junos OS implementation of enhanced transmission selection (ETS), as described in IEEE 802.1Qaz. |
PR Number | Synopsis | Category: Internet Group Management Protocol |
1520059 | Packet loss might be observed while verifying traffic from access to core network for IPv4/IPv6 interfaces Product-Group=junos |
On EX2300-48T/EX2300-48P/EX2300-48MP, packet loss may be seen when L3 IPv4/IPv6 interface and route related configurations with IPv4/IPv6 unicast stream are configured. This issue might cause traffic drop. This issue happens if two different NH(Next Hop) IDs are programmed in the Hardware for same route but only one entry is maintained in the software.This issue is specific to 48 port EX2300 platforms and will not occur on other 12/24 ports EX2300, such as EX2300-24T, EX2300-24P, EX2300-24MP. |
PR Number | Synopsis | Category: Kernel software for AE/AS/Container |
1474300 | A new aggregated Ethernet member interface for a static LAG bundle is installed in the FIB even though the micro- BFD session is down. Product-Group=junos |
On all Junos platforms, if a static Link Aggregate Group (LAG) is configured, and Bidirectional Forwarding Detection (BFD) is enabled on the LAG which is also called as micro BFD, a newly added member link might start to forward traffic immediately when the configuration change commits even though its micro BFD session is still down, for example, add a new member interface only on single end, and the remote member interface is disabled or not added. Therefore, traffic loss might be seen due to this issue. |
PR Number | Synopsis | Category: jdhcpd daemon |
1525052 | The memory leak in jdhcpd might be seen if access-profile is configured under "dhcp-relay" or "dhcp-local-server" stanza Product-Group=junos |
With access-profile being configured under "forwarding-options dhcp-relay" or "system services dhcp-local-server" stanza, there might be memory leak in jdhcpd when DHCP request is processed. The leaked memory size for each processing will be the number of bytes equal to the length of the access profile. |
PR Number | Synopsis | Category: Firewall Policy |
1500938 | The srxpfe/flowd process might crash due to memory corruption within JDPI Product-Group=junos |
On SRX/MX platforms, if there are any services (e.g. AppID, IDP, APBR and so on) running based on Juniper Deep Packet Inspection (JDPI), when the work load is reaching heavy level, for example, above 50% of max connection per second for Layer 7 security policy, or 30% for IDP, the srxpfe/flowd process might crash due to memory corruption caused by this issue. |
PR Number | Synopsis | Category: jsscd daemon |
1511745 | Static subscribers are logged out after creating a unit under demux0 interface Product-Group=junos |
In MX platforms with static subscriber scenario, the existing static subscribers associated to a demux0 interface might be forced to log out after creating another unit under demux0 interface. |
PR Number | Synopsis | Category: Issues related to Jflow Jvision Sensors |
1477445 | Sampling process might crash when the MPLS or MPLS over the UDP traffic is sampled. Product-Group=junos |
When inline-jflow is configured for sampling MPLS traffic, multi-svcs process running on the FPC may crash (which will lead to FPC crash and restart) due to MPLS resend flow referencing to an unavailable memory location. |
PR Number | Synopsis | Category: Multiprotocol Label Switching |
1517018 | The rpd might crash after upgrading Junos software release from pre 18.1 to 18.1 onwards Product-Group=junos |
On all Junos platforms, the rpd might continuously crash after upgrading Junos software release from pre 18.1 to 18.1 onwards while graceful-restart and RSVP/static LSP are configured. This is because there is a change in the data structure written to the restart db file from 18.1 onwards. So, when rpd comes up and tries to read the restart db file written by pre 18.1 release image, the rpd might crash. |
PR Number | Synopsis | Category: Multicast Routing |
1443713 | PIM (S,G) joins might cause MSDP to incorrectly announce source active messages in some cases. Product-Group=junos |
In the event of a network running: 1) a first-hop PIM router also being a rendez-vous point (RP); and 2) anycast RP in conjunction with MSDP; and 3) any-source multicast; and 4) a PIM last-hop router sending an (S,G) join when there is no traffic in the network matching the source and group, the first-hop RP will incorrectly send MSDP source-active messages to other MSDP peers. In other cases such as when the RP is not the first-hop PIM router, the traffic source needs to originate packets before the RP would originate MSDP source-active messages. |
PR Number | Synopsis | Category: FreeBSD Kernel Infrastructure |
1450093 | EX4300 : CLI config "on-disk-failure" is not supported Product-Group=junos |
On an EX4300 switch, the CLI configuration "set chassis routing-engine on-disk-failure disk-failure-action (reboot | halt)" is not supported. |
PR Number | Synopsis | Category: Express Paradise PFE Sflow |
1525589 | PTX10002-60C / PTX1K - SFLOW Adaptive-sampling with rate limiter knob enabled crosses sample rate 65535 Product-Group=junos |
'show sflow Interfaces' command displays wrong adaptive-sampling rates for rate limiter configuration. The display usually shows a sampling rate of more than 65535. |
PR Number | Synopsis | Category: Interface related issues. Port up/down, stats, CMLC , serdes |
1462748 | On the QFX5100 switches, the interface output counter is double counted for self-generated traffic. Product-Group=junos |
On QFX5100 device, interface output counter is double counted for self-generated traffic |
PR Number | Synopsis | Category: QFX Platform related (SYSLOG/ALARMS/miscellaneous) |
1317750 | Port LEDs do not work on the QFX5100 switch in QFX5110-QFX5100 mixed mode Virtual Chassis. Product-Group=junosvae |
Port LEDs on the QFX5100 do not work. If a device connects to a port on the QFX5100, the port LED stays unlit. |
PR Number | Synopsis | Category: QFX L2 PFE |
1510329 | ARP replies might be flooded through the EVPN-VXLAN network as unknown unicast ARP reply. Product-Group=junos |
The QFX5100/5110/5120/5200 platforms configured as EVPN-VxLAN leaf, the leaf will send periodic ARP requests to connected hosts to refresh the mac-ip entry when proxy-arp and suppression are enabled. These ARP replies are being processed by the leaf, however, they are also being flooded further through the EVPN-VxLAN network as unknown unicast ARP reply. This issue may decrease the bandwidth efficiency of the core network. |
PR Number | Synopsis | Category: QFX EVPN / VxLAN |
1516653 | The MAC learning might not work properly after multiple MTU changes on the access port in VxLAN scenario Product-Group=junosvae |
On QFX5120 platform running with Virtual Extensible LAN protocol (VxLAN) scenario, if there are multiple iterations of MTU change on the access port which faces Customer Edge (CE) side, for example, 20 iterations under the scale with around 100 VLAN to VXLAN Network Identifier (VNI) mapping, the MAC learning on the access port might not be able to work properly due to this issue. |
PR Number | Synopsis | Category: QFX VC Infrastructure |
1497563 | Virtual Chassis is not stable with 100-Gigabit Ethernet and 40-Gigabit Ethernet interfaces. Product-Group=junos |
In QFX5110 platform with Virtual Chassis (VC) scenario, VC might not get formed and can cause traffic loss if the 100G VCP ports are deleted and created, or changed from 40G to 100G or vice-versa. For the reason is that Forward Error Correction (FEC) should not be enabled when the physical interface is working as a VCP port. |
PR Number | Synopsis | Category: RPD Interfaces related issues |
1503075 | Fabric interface might be Monitored down after chassis cluster reboot Product-Group=junos |
On all SRX series devices with chassis cluster enabled, Fabric link might be Monitored down after rebooting both nodes simultaneously. This can cause CS(Cold Sync monitoring) and FL(Fabric Connection monitoring) failure. |
PR Number | Synopsis | Category: Remote Access VPN issues on SRX |
1442145 | With NCP remote access solution, in a PathFinder case (for example, where IPsec traffic has to be encapsulated as TCP packets), TCP encapsulation for transit traffic is failing. Product-Group=junos |
With the NCP remote access solution, where IPsec traffic has to be encapsulated as TCP packets, TCP encapsulation for transit traffic is failing. |
PR Number | Synopsis | Category: SSL Proxy functionality on JUNOS |
1516903 | The srxpfe/flowd process might crash when SSL-Proxy is used Product-Group=junos |
On all SRX Series devices with SSL-Proxy used, memory leak might occur when new session creation refers to the SSL-Proxy profile, which results in a corrupted memory accessed and the flowd/srxpfe process crash. |
PR Number | Synopsis | Category: MX10003/MX204 Platform SW - Chassisd s/w defects |
1315577 | MX10003 : Despite of having all AC low PEM alarm is raised. Product-Group=junosvae |
An alarm is raised if mixed AC PEMs are present. This occurs because the criteria for checking whether mixed AC is present was changed. |
PR Number | Synopsis | Category: SRX-1RU platfom related protocol, QoS, filtering features et |
1515046 | VRRP does not work on reth interface with a vlan greater than 1023 Product-Group=junos |
When a redundant Ethernet (reth) interface has vlan-tagging configured and is part of a VRRP group, the SRX/vSRX is unable to allocate the VIP to the reth interface if the vlan-id configured is greater than 1023. As a result, VRRP does not work. |
PR Number | Synopsis | Category: Trio pfe bridging, learning, stp, oam, irb software |
1494594 | Packets get dropped when next hop is IRB over lt interface. Product-Group=junos |
On MX series platforms, when a route's next-hop is an IRB interface with lt- as the underlying L2 interface, it is not getting programmed on PFE, resulting in packet drop. |
1501014 | Traffic to VRRP virtual IP/MAC might be dropped when ingress queueing is enabled Product-Group=junos |
On MX platforms with any MPC in enhanced network-service mode, if VRRP is configured on AE interface, after 'set chassis fpc X pic X traffic-manager mode ingress-and-egress' is enabled, traffic sent to virtual IP/MAC might be dropped and the forward traffic will be affected. |
PR Number | Synopsis | Category: Junos Automation, Commit/Op/Event and SLAX |
1442248 | SRX series devices or vSRX instances/platforms fail to download dynamic-address feed from security director Product-Group=junos |
If downloading dynamic-address feed from an HTTPS server that is configured on Security Director is available, then the download process fails. As a result the IP address contained in the list not be sent from Security Director to the platform. If the platform has a policy referencing the IP address, then that policy will not match pass-through traffic. |
PR Number | Synopsis | Category: UI Infrastructure - mgd, DAX API, DDL/ODL |
1423500 | Configuration commit might fail when the file system gets into full state. Product-Group=junos |
On all platforms running Junos OS, when the file system gets into the Full state and there is not enough spare disk space, it might get into a problematic system condition while committing the configuration. After that, if the consecutive commits are still done in such a problematic condition, commit-check failure logs might be seen eventually. Due to this issue, some processes might not run even if the configuration is present. |
PR Number | Synopsis | Category: MX10K linecard |
1510994 | The disabled QSPF transceiver might fail to be turned on Product-Group=junos |
In the scenario that QSFP is used as a single interface or child link of the AE interface, if the interface is disabled and enabled frequently, the write errors might happen on I2C (Inter-Integrated Circuit) of QSPF. Then the laser of QSFP might not be enabled. |
PR Number | Synopsis | Category: SFI Infra-structure |
---|---|---|
1485038 | The following error message is observed: IFDE: Null uint32 set vector, ifd and IFFPC: 'IFD Ether uint32 set' (opcode 151) failed continuously in AD with base configurations. Product-Group=junos |
EX 9251 Summit-B54 : "IFDE: Null uint32 set vector, ifd and IFFPC: 'IFD Ether uint32 set' (opcode 151) error message is observed continuously in AD with base configurations. |
PR Number | Synopsis | Category: EX2300/3400 platform |
1408675 | EX3400 PSU status is still taking "check" status even though PSU module has been removed Product-Group=junos |
EX3400 PSU status is still taking "check" status even though PSU module has been removed |
PR Number | Synopsis | Category: QFX PFE L2 |
1480132 | On QFX5100, fxpc CPU utilization is increased after Broadcom SDK upgrade to 6.5.x from 5.3.x Product-Group=junos |
On QFX5100 switches, FXPC CPU utilization is increased due to high number of active ports after third-party (Broadcom ) SDK upgrade to 6.5.x from 5.3.x. |
PR Number | Synopsis | Category: QFX L3 data-plane/forwarding |
1481987 | Multicast traffic loss could be seen in certain conditions while enabling IGMP snooping under EVPN-VXLAN ERB scenario Product-Group=junos |
On QFX5110 & QFX5120 platform, which is running as Layer 3 VxLAN gateway, if "igmp-snooping" is enabled in partial but not for all bridge-domains, multicast traffic loss could be observed in non-igmp snooping bridge-domains. |
PR Number | Synopsis | Category: ACX MPLS |
1456624 | On the ACX5448 device, the Layer 2 VPN with the Ethernet encapsulation type stops passing traffic after a random port is added with VLAN configuration. Product-Group=junos |
On ACX platform with L2VPN family and encapsulation-type ethernet, there might be packet drops seen after a random port is added with VLAN configuration on the device. The traffic drops are caused due to the egress entry being incorrectly shared between the ethernet-ccc and the vlan-bridging (mapping). |
PR Number | Synopsis | Category: ACX Services feature |
1504717 | Observed core-ripsaw-node-aftd-expr on ACX6360 Product-Group=junos |
acx6360: Observed core-ripsaw-node-aftd-expr |
PR Number | Synopsis | Category: a20a40 specific issue |
1505864 | The installation fails when upgrading from legacy Junos to specific BSDx based Junos Product-Group=junos |
The installation fails when upgrading from legacy(non-BSDx) Junos to specific BSDx based Junos releases. |
1522130 | PFE_FLOWD_SELFPING_PACKET_LOSS error messages reported for CP SPU Product-Group=junos |
Syslog reporting "PFE_FLOWD_SELFPING_PACKET_LOSS: Traffic impact: Selfping packets loss/err: 300 within 600 second" error messages in node0 and node1 CP |
PR Number | Synopsis | Category: Border Gateway Protocol |
1517498 | The rpd might crash after deleting and re-adding a BGP neighbor Product-Group=junos |
In BGP scenario on all Junos platforms, after deleting and re-adding a BGP neighbor, the rpd might crash due to a rare timing issue. |
PR Number | Synopsis | Category: Control Plane for Node Virtualization |
1451215 | Main chassisd thread at a JNS GNF might experience stalls upon GNF SNMP polling for hardware-related OIDs. Product-Group=junos |
- Chassisd main thread stalls could be seen at a JNS GNF upon GNF SNMP polling for HW-related OIDs (e.g. ones from jnxBoaAnatomy MIB). - If a GNF chassisd main thread stalls are ongoing and the GNF is restarted, then a service MGD process at the BSYS could start spinning at 100% CPU. This MGD process won't terminate by itself and will be consuming 100% CPU even when the GNF is back online. |
PR Number | Synopsis | Category: EVPN Layer-2 Forwarding |
1408840 | In an Ethernet Virtual Private Network-Virtual Extensible LAN scenario with scaled bridge domains configured (for example, 4000 bridge domains), if the core-facing link on the VXLAN tunnel endpoint (VTEP) comes up (Down >> Up), the traffic received from the customer edge (CE) might be dropped by the VTEP for a period of time before it becomes normal. Product-Group=junos |
In a EVPN-VXLAN scenario with scaled Bridge Domains configured (for example, 4000 Bridge Domains), if the core facing link on the VTEP (VXLAN Tunnel Endpoint) comes up (Down >> Up), the traffic received from the CE (Customer Edge) might be dropped by the VTEP for a period of time before it becomes normal. |
PR Number | Synopsis | Category: Sflow on qfx10k/ptx series PRs for defect & enhancement req |
1475082 | The sFlow could not work correctly if the received traffic goes out of more than one interface. Product-Group=junos |
On QFX10K platforms, if the traffic which is received from AE bundle go out of more than one interface, the sflow might work incorrectly. |
PR Number | Synopsis | Category: Express PFE MPLS Features |
1515092 | The routes update might fail upon HMC memory issue and traffic impact might be seen Product-Group=junos |
On PTX Series and QFX Series devices, in rare cases, HMC memory error might cause routes update failure and traffic impact on the Packet Forwarding Engine. |
PR Number | Synopsis | Category: Stateful firewall and NAT |
1433063 | NTAD daemon running in 32bit mode (the only possible mode in current implementation) is not compatible with RPD running in 64bit mode Product-Group=junos |
Currently NTAD daemon can run only in 32bit mode. To have NTAD running, RPD has to run in 32bit mode too. If RPD runs in 64bit mode, then NTAD will crash cyclically once started. After 4th crash NTAD won't be automatically restarted. This problem has no fix currently. |
PR Number | Synopsis | Category: to track replication related interface bugs |
1372087 | If you perform GRES with the interface em0 (or fxp0) disabled on the master Routing Engine, when you enable the interface on the new backup Routing Engine, you might not be able to access the network. Product-Group=junos |
If performing GRES with the interface em0 (or fxp0) disabled on the master RE, then enabling the interface on the new backup RE, it isn't able to access network. |
PR Number | Synopsis | Category: Libjtask for RPD tasks, scheduler, timers, memory, and slip |
1463368 | Need to add the Backport jemalloc profiling CLI support to all Junos OS Releases where jemalloc is present. Product-Group=junos |
Backport jemalloc profiling CLI support to all releases where jemalloc is present. |
PR Number | Synopsis | Category: ISIS routing protocol |
1526447 | ISIS LSP database Sync issue while using Flood group feature Product-Group=junos |
On a Junos platform, when flood-group is configured on any interface & after isis adjacency flap, the device is sending only self-generated LSPs & not incrementing the LSP updates received from neighbor which flapped. This is causing LSP database out of sync. |
PR Number | Synopsis | Category: Flow Module |
1467654 | TCP session might not time out properly upon receiving TCP RESET packet Product-Group=junos |
TCP session cannot time out properly upon receiving the TCP RESET packet, and the session timeout does not change to two seconds. |
PR Number | Synopsis | Category: Firewall Policy |
1454907 | Traffic might be dropped when policies are changed in SRX Series devices Product-Group=junos |
If a huge number of policies are configured on SRX Series devices and some policies are changed, the traffic that matches the changed policies might be dropped. |
PR Number | Synopsis | Category: Security platform jweb support |
1493601 | Infinite loading circle may be encountered via J-Web on SRX platforms Product-Group=junos |
On SRX platforms, infinite loading circle may be encountered on J-Web after navigating new page when the page is still rendering. |
PR Number | Synopsis | Category: Label Distribution Protocol |
1521698 | LDP session-group may through the commit error on EVO platforms and keeps flapping in MX platform. Product-Group=junos |
Customers may experience below issues addressed in this PR. --- Configuration of "protocols ldp session-group" on EVO platform may through commit failure error. --- LDP session keeps flapping on MX power PPC platform upon adding authentication key in ldp session-group. |
PR Number | Synopsis | Category: sflow on MX PRs for defect & enhancement requests |
1487876 | Incorrect 'frame length' of 132 bytes might be captured in packet header Product-Group=junos |
On all MX/PTX5k/EX platforms with Trio based line cards, if a packet is send with more than 128 bytes it will always show incorrect "Frame length" of 132 bytes in raw packet header of sflow collector captured data. |
PR Number | Synopsis | Category: PE based L3 software |
1500798 | BFD sessions flap after deactivating or activating the aggregated Ethernet interface or executing GRES. Product-Group=junos |
On QFX10008 platforms, if the BFD is configured over an AE interface (member link across multiple FPCs), deactivating/activating the AE interface or executing GRES will cause the BFD sessions to flap. |
PR Number | Synopsis | Category: QFX PFE Class of Services |
1430173 | The CoS rewrite rules applied under an aggregated Ethernet interface might not take effect after NSSU. Product-Group=junos |
On QFX 5K platform, Class of Service (CoS) rewrite rules applied under an Aggregated Ethernet (AE) interface might not take effect after Non-Stop Software Upgrade (NSSU). In the end, packets could not enter into correct queues for sending. |
PR Number | Synopsis | Category: RPD Next-hop issues including indirect, CNH, and MCNH |
1407408 | The process rpd crash may be observed once a non-forwarding path is used for re-resolution Product-Group=junos |
The process rpd might crash after a non-forwarding route (that is, a route to an indirect next-hop association is a non-forwarding indirect next- hop) which is received from multiple protocols is resolved again by using the non-forwarding path. |
PR Number | Synopsis | Category: RPD route tables, resolver, routing instances, static routes |
1421566 | Some LDP routes in VRF cannot be resolved over inet.3 table. Product-Group=junos |
Some LDP routes in VRF (e.g. foo.mpls.0) cannot be resolved over inet.3 table, which makes these LDP routes hidden. |
PR Number | Synopsis | Category: Generic platform and infra issues for MS-MIC and MS-MPC(XLP) |
1482400 | The vmcore crash sometimes along with mspmand crash might happen on MS-MPC/MS-MIC if large-scale traffic flows are processed by it Product-Group=junos |
With NAT/Stateful-firewall/TCP tickle (enable by default) configured on MS-MPC/MS-MIC, the vmcore crash sometimes along with mspmand crash might happen if large-scale traffic flows (e.g. million flows) are processed by it. |
PR Number | Synopsis | Category: Trio pfe l3 forwarding issues |
1472587 | MX10003/MX204 BFD/LACP may flap during BGP convergence Product-Group=junos |
During BGP converence, eg full internet table load, the BFD and LACP protocol on the router may flap |
PR Number | Synopsis | Category: UI Infrastructure - mgd, DAX API, DDL/ODL |
1452136 | The mgd might crash when you use the replace pattern command. Product-Group=junos |
When you use the "replace pattern" command to replace the name in the apply-group, the mgd crashes. |
PR Number | Synopsis | Category: For GPRS security features on highend SRX series |
1526801 | GTP traffic dropped when enable-gtpu-distribution is configured Product-Group=junos |
On SRX5k platform, when GTP Distribution (enable-gtpu-distribution) is configured without GTP Inspection enabled on the security policies, the GTP traffic is not getting distributed and traffic may get dropped. This issue exists from Junos 18.1 until Junos 19.1 and the fix is in Junos 19.2R1 and all higher releases. |
Getting Up and Running with Junos
Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search