PR Number |
Synopsis |
Category: Express BT PFE L3 Features |
1530710 |
"show pfe statistics error" should print counters for meaningful errors
Product-Group=evo |
"show pfe statistics error", on Junos Evolved platform, shows only "Error Count: <>" for all errors for all PFEs. |
1557444 |
EVO COS: ~260G of traffic drops are consistently seen on egress AE1 (20x100G), after the Ingress/Egress FPC is restarted
Product-Group=evo |
The throughput might fall below the advertised line-rate if multiple traffic flows use the same egress interface. To recover, the traffic flows must be spread across multiple egress interfaces. |
1561608 |
Junos EVO - Traffic loss of around 10 to 12 seconds seen on offline / online FPC
Product-Group=evo |
In the JUNOS Evolved version 20.3 release, when an FPC is off-lined, there may be traffic loss for about 10 seconds. |
PR Number |
Synopsis |
Category: Issues related to EVO interface statistics. |
1554370 |
The output of "show interface queue <>" always show "Forwarding classes: 16 supported, 4 in use" with customized configuration
Product-Group=evo |
On a PTX running Junos Evolved software, the output of "show interface queue <>" always show "Forwarding classes: 16 supported, 4 in use" with customized configuration. |
PR Number |
Synopsis |
Category: System Management daemon and related issues |
1552045 |
request system reboot is taking longer in new release
Product-Group=evo |
When you issue the "request system reboot" command, the backup routing engine (backup RE) takes about 1 minute longer to clean up the system's state before it reboots. |
PR Number |
Synopsis |
Category: EVO linux defects & enhancement requests |
1528996 |
[interface] [interface] ptx10004 : PTX10004 :: The system login banner/ message is not showing up when we telnet to the device.
Product-Group=evo |
Standard "issue" message is not displayed for the initial login attempt, but if that login attempt fails for any reason and the user is re-prompted, then the message is displayed. This seems to be an issue common to PTX10004. |
PR Number |
Synopsis |
Category: AAA, auditd issues |
1557052 |
EVO Vs JUNOS : strict-authorization config option missing under set system tacplus-options.
Product-Group=evo |
With this change, when config knob strict-authorization is configured under tacplus-options and authorization fails, user is not allowed to login. |
PR Number |
Synopsis |
Category: Category for software tracing Infra issues |
1556040 |
Core dump for trace-relay process is seen
Product-Group=evo |
If some application spawns too many threads trace-relay daemon may dump core if it reaches the upper cap of memory usage. The trace infra will recover and there will be no impact to service. No action needed from user. |
PR Number |
Synopsis |
Category: Express PFE CoS Features |
1544551 |
EVO COS GRES: Consistent queue drops on high priority AF4 queue, after back-to-back GRES (by yank-out the RE0 followed by RE1) with 125% over-subs traffic
Product-Group=evo |
Consistent queue drops on high priority AF4 queue, after back-to-back GRES (by yank-out the RE0 followed by RE1) with 125% over-subs traffic |
1553943 |
[aft] [generic_evo] ptx10004 : PTX10004 :: - seeing cmerror dp_1_viqm_intr_req_enq_err, not cleared after loading latest 20.4 EVO
Product-Group=evo |
In scenario of queue congestion, interface enable/disable or in PFC mode this interrupt can come on this release. |
PR Number |
Synopsis |
Category: Express PFE FW Features |
1499294 |
On a QFX5220 :: show firewall cli shows error error: communication failure with /re0/evo-pfemand/ when unique filter is applied over all physical interfaces.
Product-Group=evo |
show firewall cli shows error error: communication failure with /re0/evo-pfemand/ when unique filter is applied over all physical interfaces. |
1554685 |
Encapsulate and Decapsulate actions are not supported under firewall
Product-Group=evo |
Encapsulate and Decapsulate actions are not supported under firewall |
PR Number |
Synopsis |
Category: ISIS routing protocol |
1537300 |
Traffic loss for few seconds after NSR Re switchover for scale routes
Product-Group=evo |
Traffic loss is observed during scale as the remnant routes convergence time is more than the default 180s. Seems to be a day1 evo issue. There is no workaround. Reducing the scale could avoid this issue. |
1540400 |
Traffic loss may be seen after graceful switchover
Product-Group=evo |
traffic loss seen after graceful switchover with LSR Core MPLS_DSCP profile configuration |
PR Number |
Synopsis |
Category: KRT Queue issues within RPD |
1542511 |
PTX10008 JNP10K-LC1201 : rpd core seen @ krt_reset_krtq_op_mcnh with lsr core profile configuration
Product-Group=evo |
PTX10008 JNP10K-LC1201 : rpd core seen @ krt_reset_krtq_op_mcnh with lsr core profile configuration |
PR Number |
Synopsis |
Category: PTX10K RE EVO Issues |
1556600 |
Cleaning up the unsupported knob "set chassis redundancy keepalive-time & failover" from Junos Evolved software
Product-Group=evo |
'set chassis redundancy keepalive-time' is not yet supported in EVO. Hence removing the CLI. |
PR Number |
Synopsis |
Category: Express PFE L2 fwding Features on ZX platforms |
1568566 |
Routes learned via IRB interface might not be reachable in IBGP setup
Product-Group=evo |
On Junos EVO based PTX10003/QFX10003 platforms with IBGP setup, the route is not reachable if it is learned via indirect Next Hop, which further points to unicast Next hop and getting resolved through IRB interface. There will be complete traffic for the affected route.
|