Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[SBR] Patches for Steel-Belted Radius Enterprise and Global Enterprise for OpenSSL Vulnerability



Article ID: KB29217 KB Last Updated: 08 Mar 2017Version: 5.0

This article provides basic information for the OpenSSL vulnerability documented in CVE-2014-0224.

Important: This article ONLY applies to Steel-Belted Radius Enterprise Release 6.10-6.17 and Steel-Belted Radius Global Enterprise Release 6.10-6.17.

This article does not address Steel-Belted Radius Carrier Release 7.x/8.x.  Please contact JTAC directly for information regarding this version.


Steel-Belted Radius version 6.1x has been identified as being vulnerable to the OpenSSL vulnerability discussed in Vulnerability Summary for CVE-2014-0224.

This article will provide access to and instructions for installing the patched libraries.


Steel-Belted Radius is supported on three platforms; Windows, Linux and Solaris (Sparc).

Download the appropriate archive file from this article and extract to a temporary directory on your server:

Windows x86 and x64


  1. Stop the Steel-Belted Radius service via the 'services' control panel.
  2. Once stopped, copy the files located in the archive to "C:\Program Files\Common Files\Funk Software\" or "C:\Program Files (x86)\Common Files\Funk Software\" depending on the operating system version.
  3. Start the Steel-Belted Radius service and verify that the server starts by logging into the Web Admin.


  1. Stop the Steel-Belted Radius daemon by issuing the command : ./sbrd stop from within the /opt/JNPRsbr/radius  directory.
  2. Use the chmod command to change the permissions on the libraries to rwxr-xr-x. Issue the command : chmod 755 *.so in the temporary directory.
  3. Once the daemon is stopped, copy the files in the temporary directory to /opt/JNPRsbr/radius/system/lib
  4. Start the Steel-Belted Radius daemon by issuing the command : ./sbrd start from within the /opt/JNPRsbr/radius directory.
  5. Verify that the server has started by logging into the Web Admin.
Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search