Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

Configuring an L2TP IP Pool on the Juniper Firewall

0

0

Article ID: KB4109 KB Last Updated: 09 Jun 2010Version: 6.0
Summary:
Configuring an L2TP IP Pool on the Juniper Firewall
Symptoms:

Solution:

Note: This article applies to ScreenOS 5.0 and above.

To configure an L2TP IP pool on the Juniper Firewall, perform the following steps:

Step one: Open the WebUI. For an example of how to access the WebUI, consult: KB4060 - Accessing Your NetScreen, SSG, or ISG Firewall Using the WebUI

Step two: From the ScreenOS options menu, click Objects, and then click IP Pools.

Image of step two

Step three: Click New.

Image of step three

Step four: From the Edit screen, enter an IP Pool Name, a Start IP, and an End IP.

Note: For this example, we have chosen an IP Pool Name of global, a Start IP of 10.10.2.100, and an End IP of 10.10.2.180.

Warning: To avoid potential routing problems, make sure the IP Pool is on a different IP Subnet than the Trust Zone.

Image of step four and five

Step five: Click OK.

Related Links

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search