Support Support Downloads Knowledge Base Juniper Support Portal Community

Knowledge Base

Search our Knowledge Base sites to find answers to your questions.

Ask All Knowledge Base Sites All Knowledge Base Sites JunosE Defect (KA)Knowledge BaseSecurity AdvisoriesTechnical BulletinsTechnotes Sign in to display secure content and recently viewed articles

[ScreenOS] How do I pass 802.1q VLAN tagged packets across the NetScreen firewall?



Article ID: KB6350 KB Last Updated: 15 Dec 2017Version: 6.0
This article provides information on how to pass 802.1q VLAN tagged packets across the NetScreen firewall.
Unable to pass 802.1q VLAN tag packets
  • Passing 802.1q tagged VLAN packets is possible only with the transparent mode, running ScreenOS 5.0 or higher. You need to enter the set interface vlan1 vlan trunk command.

  • If the firewall is running in layer 3 mode, you will need to configure a sub interface for each VLAN to accept traffic from. Traffic will then be retagged based on the egress interface.
Modification History:
‚Äč2017-12-07: Article reviewed for accuracy. No changes made. Article is correct and complete.

Related Links

Comment on this article > Affected Products Browse the Knowledge Base for more articles related to these product categories. Select a category to begin.

Getting Up and Running with Junos

Getting Up and Running with Junos Security Alerts and Vulnerabilities Product Alerts and Software Release Notices Problem Report (PR) Search Tool EOL Notices and Bulletins JTAC User Guide Customer Care User Guide Pathfinder SRX High Availability Configurator SRX VPN Configurator Training Courses and Videos End User Licence Agreement Global Search